How to Replace the Bake Element

Step-by-Step Instructions

1. Disconnect Power

Before doing anything, ensure the range is unplugged or the breaker is turned off.
Never work on an energized appliance.

2. Remove Rear Panels

• Remove the screws from the back panel of the range.

• Remove the lower rear panel.

• Remove the upper rear panel to expose internal components.

3. Remove the Black Bracket

• Locate and remove the screws holding the black metal bracket

4. Remove the Bake Element Tray

• Remove the two screws securing the element tray.

• Carefully pull the tray out so the wiring is accessible.

5. Disconnect the Bake Element

• There are three wires attached to the element.

• Unclip the element from the tray.

• Disconnect the wires from the old element (pull connectors, not wires).

6. Install the New Bake Element

• Clip the new element into place in the tray.

• Attach all three wires securely to the new element terminals.

• Slide the tray fully back into position.

7. Reassemble the Range

Reinstall everything in reverse order:

1. Secure the element tray with its screws

2. Reinstall the black bracket

3. Replace the lower rear panel & main back panels

8. Restore Power & Test

• Plug the range back in or restore the breaker.

• Run the oven at a moderate temperature to confirm the new bake element heats correctly.

Important Notes

• Always disconnect power first.

• Pull on connectors, not wires, when disconnecting.

• Tighten all screws securely during reassembly.

• Loose electrical connections can cause malfunctions.

References

For a visual walk-through, see our video here:
https://www.youtube.com/watch?v=hXon_pS4x_U&list=PLnT3qxaNOg-27Rxza8dGaYjvb1WM_0G03&index=14

Where to Order the Replacement Part

If you need a new bake element, you can purchase one here:
https://parts.stirlingmarathon.com/collections/ranges

Simply find the correct element for your model and order directly.